Radiator water chamber press
Keyword：
Category：
Detail
1. Uses
This machine is used for flange bite between the plastic water chamber and the side plate of the automobile water tank, so that the plastic water chamber is well sealed with the side plate through the sealing gasket to form a confined space.
There is a pneumatic pre-compression device to press the water chamber firmly before flanging.
The main movement of the flange is the cylinder up and down to drive the pressure plate action, the operation can be cycled, and the operator is responsible for loading and unloading the workpiece.
The pressure of the cylinder can be adjusted to change the pressure of the flange. Due to the hydraulic pressure to realize the flanging action, the sealing and pressing effect after flanging is the best.
This machine is divided into long side pressing machine (main machine) and short side pressing machine (auxiliary machine), respectively pressing the long side and short side of the motherboard, each time pressing one workpiece. Press the long side first, then the short side.
Hydraulically driven, using variable displacement pump, adjustable pressure, suitable for various materials of motherboard flanging.
The electronic control system adopts PLC control, which is small in size and convenient to operate.
2. Specifications and performance
Applicable workpiece: automobile water tank
Main technical parameters (adjusted according to the size of the workpiece):
Maximum heatsink height: 1000 mm (motherboard pitch)
Maximum heatsink width: 850 mm (motherboard length direction)
Maximum radiator thickness: 100 mm (adjustable)
Work beat: 10 seconds/time
Related product
Inquiry
CONTACT US
Factory address：No. 26, Shaming Road, Yuhong District, Shenyang
Office address：No. 1, Qishan Middle Road, Huanggu District, Shenyang (13th floor, Northeast Machinery Building)
Post code：110032
Tel：024-86222398 86244992 82059405
Mobile：13909839892
Fax：024-86244992
E-mail：huizhiii@163.com
http://www.huizhii.com
Copyright Shenyang Huizhi Precision Machinery Co., Ltd All rights reserved