Aluminum water tank pipe riser
Keyword：
Category：
Detail
I. Overview
The pipe riser for all-aluminum water tank is a device that connects aluminum tubes and aluminum fins together in the production of all-aluminum water tanks. This process is located after the piercing process, which automates the process of aluminum tube and fin rising, and its process is safe, fast and reliable, filling the gap of the domestic aluminum water tank pipe riser.
Second, the characteristics
1. The pipe riser for all aluminum water tank has two operating modes: automatic control and manual control, and the electronic control adopts a PC imported from Japan (that is, a programming controller) to control the whole process of this rising, which is safe and reliable to work.
2. The workpiece is manually operated
3. Each working cycle can be connected to an aluminum water tank.
4. At the same time of rising, lubricate in the aluminum tube.
3. Specifications and performance
1. Number of pieces per processing: 1 piece
2. Processing cycle: processing time: 20 seconds
Auxiliary time: 15 seconds
3. Total thickness of fin after product processing: 700mm
4. Fin size: see figure
5. Total length of aluminum tube after rise: 740mm
6. Aluminum tube size: F8×t0.4
7.氣源:5kg/cm2 10NL/min
8. Power supply: 380V 50HZ 16A three-phase four-wire system
9. Water volume: 1m3/hour Water pressure: 1kg/cm2 or more
10. Equipment dimensions: 5000 (length) × 1800 (width) × 1200 (height)
11. Total weight of equipment: 2000kg
Related product
Inquiry
CONTACT US
Factory address：No. 26, Shaming Road, Yuhong District, Shenyang
Office address：No. 1, Qishan Middle Road, Huanggu District, Shenyang (13th floor, Northeast Machinery Building)
Post code：110032
Tel：024-86222398 86244992 82059405
Mobile：13909839892
Fax：024-86244992
E-mail：huizhiii@163.com
http://www.huizhii.com
Copyright Shenyang Huizhi Precision Machinery Co., Ltd All rights reserved